5 tons computer WDW-50
Brief introduction：This series of microcomputer controlled electronic universal testing machi
1. Equipment parameters and configuration
Technical parameters | To configure |
1. maximum test force: 30KN 2. test machine grade: Level 1 3. the allowable error limit of the test force indication: within 1% or less of the indication value. 4. load measurement range: 1% ~ 100%FS of full range 5. displacement limit error: less than 1% of the indication 6. displacement resolution: 0.001mm 7. adjustment range of displacement speed: 0.1-500mm/min 8. control accuracy of displacement rate: within or below 0.5% of the set value when the speed is greater than 1mm/min. 9. effective test width: 400mm 10. effective stretch space distance: 0-650mm 11. the size of the device mainframe (length * width * height): 800*480*1870 mm 12. the test process, measurement, display, analysis and control are completed by microcomputer. 13., it can meet the control mode of stress, strain and displacement. 14. after the specimen is damaged, the moving beam stops moving automatically (or automatically returns to the initial position). 15. with program control and mechanical two level protection 16., when the load exceeds the rated value of 3 ~ 5%, automatic shutdown. 17. power supply: 220V, 50Hz, 1500W 18. net weight of equipment: 350Kg | 1. 30kN high strength main engine (portal frame structure, whole machine spray treatment). 2. high precision photoelectric encoder 3. high precision AC servo speed control system and AC servo motor. 4. high precision ball screw pair 5. high precision circular arc synchronous deceleration system 6. 50KN high precision spoke sensor one branch A set of special tensile accessories for 7. test machines A set of special compress accessories for 8. test machines 9. Lenovo brand computer 10. HP color inkjet printer A set of special test and control card for 11. test machine 12. WINDOWSXP/2007 operating environment MaxTest test machine special software set, multi language printing color technology image data, automatic operation, single person independent and easy to complete. |
Two. Main uses:
This series of microcomputer controlled electronic universal testing machine is suitable for testing the mechanical properties of rubber, plastic, textile, waterproof material, wire and cable, wire and cable, wire wire, wire, metal bar, metal plate, various metal, nonmetal and composite materials. Bending test. The test machine has the test force digital display, the test speed is continuously adjustable, the sample is broken automatically, the peak hold and so on. The test results fully meet the requirements of the national standard of the first level.
Three. Function and characteristics:
The design of HDW series microcomputer controlled universal testing machine converge the control technology and shape design of advanced test equipment. This machine has beautiful appearance, convenient operation, no pollution, low noise, stable and reliable performance, and has a wide range of speed regulation. The machine adopts alternating frequency stepping motor and AC digital servo speed control system as the driving device. After the circular arc synchronous belt and the circular arc synchronous pulley deceleration system decelerate, the precision ball screw pair is loaded, and a variety of mechanical properties test of the sample is completed.
Five. Quality assurance
After the formal acceptance of the equipment, the equipment shall be regarded as a formal delivery. The three period of the equipment is one year from the date of formal delivery (except for the other delay stipulated by the supplier). In the three package period, the supplier will service and repair all kinds of malfunctions of the equipment in time. During the operation of the warranty, the supplier will be in trouble with the ordering party and assist the ordering party to complete the maintenance task.
