Digital display electronic universal testing machine WDS-100
Brief introduction：The series digital universal testing machine is suitable for testing the m
1. Equipment parameters and configuration
Technical parameters | To configure |
1. The maximum test force: 100KN; 2. Range: 0N-100KN; 3. The accuracy of the test force is better than that of 1%. 4. Displacement resolution: 0.001mm; 5. The accuracy of displacement measurement is better than that of 1%. 6, stretching stroke: 700mm (can be enlarged) 7, compression stroke: 700mm (can be increased) 8. Test stroke: 700mm (can be enlarged) 9. Displacement speed control range: 1mm/min ~ 300mm/min 10. The precision of the displacement speed control is better than that of 1%. 11. Test machine level: superior to level 1 12. The size of the test machine: 800*480*1860 mm 13, appearance: meet the requirements of GB/T2611 14, complete set: meet the standard requirements 15, protection function: test machine has overload protection function 16. Power supply: 220V, 50Hz 17, weight: 500KG | 1. 100KN high strength main engine (portal frame structure) 2. high precision photoelectric encoder 3. digital servo speed control system and digital servo motor. 4. precision screw pair two sets A set of 5. precision circular arc synchronous deceleration system 6. 100kN high precision spoke load sensor A set of 7. special tensile accessories Round jaw: 4-9mm Flat tongs: 0-14mm A set of 8. special compression accessories 9. universal testing machine control system A set of 10. large liquid crystal displays and multifunction key boards 11. optional printer |
Two. Main uses:
The series digital universal testing machine is suitable for testing the mechanical properties of rubber, plastic, textile, waterproof material, wire and cable, wire rope, wire, wire, metal bar, metal plate, various metal, nonmetal and composite materials, such as all kinds of tensile tests, the compression and bending can be easily completed by changing the attachments. The test of song and so on. The digital display electronic universal testing machine has the digital display of test force, the test speed is continuously adjustable, the test sample is broken automatically, the peak hold and so on. The test results fully meet the requirements of the relevant national standards.
Three. Function and characteristics:
The design of HDS-D digital universal testing machine converge the control technology and shape design of advanced test equipment. This machine has beautiful appearance, convenient operation and stable and reliable performance. The machine uses AC servo speed control motor and AC digital servo speed control system as the driving device. After the circular arc synchronous belt and the circular arc synchronous pulley deceleration system decelerate, the precision ball screw pair is loaded, and a variety of mechanical properties test of the sample is completed.
The machine has no pollution, low noise, high efficiency and wide speed range.
Four. Equipment description
1. The high precision, all digital speed control system and the precision reducer are used to drive the precision screw pair to carry out the experiment to achieve a wide range adjustment of the test speed. The noise of the test process is low and the operation is stable.
2, the universal joint uses the cross pin structure, and has the angle limiting function. On the one hand, it is easy to hold the sample and ensure the test concentricity. On the other hand, the influence of the irregular sample on the sensor is eliminated.
3, touch key operation mode, LCD display in real time. The display interface can display test method selection interface, test parameter selection interface, test operation and result display interface and curve display interface, which is convenient and quick.
4. The beam can be adjusted quickly and slowly when the sample is clamped. It has overcurrent, overvoltage and overload protection devices.
5, the computer interface is selected to realize the control of the test process and the storage and printing of the data.
Five, after sale quality service
After the formal acceptance of the equipment, the equipment shall be regarded as a formal delivery. The three package period is one year from the date of formal delivery. During the three package period, the supplier will provide free repair service for all kinds of malfunctions of the equipment and make timely and free replacement of damage caused by non-human parts. During the operation of the warranty, the supplier will promptly serve the ordering party and assist the ordering party to complete the maintenance task.
