First, product introduction:

MMW-1A friction and wear tester is a frictional form with rolling, sliding or sliding rolling under certain contact pressure. It has a stepless speed regulation system and can be used to evaluate the friction and wear properties of lubricants, metals, plastics, coatings, rubber, ceramics and other materials, such as low speed pins, at very low speed or high speed. The disc (with a large plate and small plate, single needle and three needle) friction function, four ball long anti wear performance and four ball rolling contact fatigue, ball - Bronze three lubrication performance, and thrust washer, ball - disc, mud wear, rubber seal ring seal moment and stick slip friction performance test. The test machine has a wide application in the field of tribology, petrochemical, mechanical, energy, metallurgy, aerospace, colleges and universities, research institutes and other departments.

Two. The main technical specifications:

1. Test force

1.1 Test force range: 2N to 1000N (stepless adjustable)

1.2 Telative error of test force indication : below 100N, + 2N, 100N above 1%.

1.3 The sense of zero point of test force: + 1.5N

1.4 Automatic loading rate of test force: 300N/min

1.5 The relative error of indication automatically maintained at the test force: + 1%

2. Friction moment

2.1 max. friction moment: 2.5N.m

2.2 Relative error of the friction moment: + 2%

2.3 Friction load sensor: 50N

2.4 Friction arm distance: 50mm

2.5 Moment zero error of friction moment: + 0.15%

3. The range of spindle stepless speed change

3.1Spindle conversion speed range: 1-2000r/min

3.2 Spindle speed error: + 1rpm

4, Test medium: oil, water, mud, abrasive and so on.

5. The heating system of the test machine

5.1 Heater working range: room temperature to 200℃ (260 ℃)

5.2 Accuracy of temperature：±2℃

6. Test machine spindle taper: 1:7

7. Max. distance between the spindle and the sub disk of the test machine: > 75mm

8.Test machine control system

8.1 Adopt industrial control motherboard, touch screen control, professional edition control software.

8.2, Manual control, time control, speed control and friction torque control can be realized.

Time display and control range of 8.3. tester: 10s ~ 9999min

8.4.Test machine speed (cycle) display and control range: (1~99) x 105

8.5. Test machine main motor output maximum torque: 5N.m

9. Test machine time display and control range: 10s ~ 9999min

10. Speed and cycle control of test machine: (1~99) x 105

11.The maximum torque of the main motor of the test machine: 5N.m

12. The size of the tester is L * B * H: 860 * 740 * 1560mm

13. Weight: 650kg

14. Main accessories and special accessories of the test machine

Three. A summary of the friction pairs of the test machine

1. pin friction pairs: (Fig. five pin friction pairs < single needle and three pin >).

2. thrust ring friction pair (Figure six)

3. ball disc friction pair < single ball and three ball > figure seven

4. four ball friction pairs (for example, figure eight)

Tel:+86-0531-85860713，+8615508660930

WeChat/WhatsApp：+8615508660930

Skype:+8615589966455

QQ：1538151698

The contact：Janna Tang

Email:cnjntest@163.com